• Blum’s thick door half cranked clip top hinge for back-to-back doors.
• For door thicknesses from 19mm (3/4″) to 30mm (1-1/8″).
• Please see the “Reveal & Overlay Information” document below to verify if this bundle will work for your application.

What’s Included

• 1 Blum Thick Door Half Cranked Hinge
• 1 Blum 0mm System Screw Frameless Mounting Plate
• Two #6 x 5/8″ screws for the hinge
• Depending on cabinet side wall thickness you will need either of the following:
• For cabinet wall thickness of 5/8″ to 7/8″, you will need to use two back to back mounting screws.
• For cabinet wall thickness of 1″ or greater, use two #6 x 5/8″ screws.

Mounting Screws for Mounting Plate (Not Included)

• Depending on cabinet side wall thickness you will need either of the following screws for the mounting plate:
  • For cabinet wall thickness of 5/8″ to 7/8″, you will need to use back to back mounting screws.
  • For cabinet wall thickness of 1″ or greater, use #6 x 5/8″ screws.
• Note that only two back to back screws are required for two hinges, whereas you would need four #6 x 5/8″ screws for two hinges.

Optional Accessories -Available for purchase separately:

• Cover Plate for Arm Part of Hinge – Hides the screws on the hinge arm providing a cleaner appearance (SKU 268002)
• Cover Plate for Cup Side of Hinge – Hides the screws on the cup side providing a cleaner appearance(SKU 701114)
• Soft-Close Add-On Device – Eliminates slamming of the door and dampens the closing action(SKU 268233)
• Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
• Blum Touch Latch for Self-Closing Doors (SKU 268822)
• 35mm Forstner Bit, for new installations (SKU 204000)
• Ecodrill, installation jig, for new installations (SKU 701000)