• This heavy duty hinge allows smooth, silent, sag-free opening to 175 degrees
• 175 degree cabinet hinge surface mounts to the inside of your frameless cabinet. Small screw holes are the only holes you need to drill.
• Hinge works on 5 different applications: full overlay doors (maximum overlay is 3/4″), half-overlay doors, full inset doors, and mitered corner doors (click on document found under Downloads for illustrations) It also works on 3/8″ inset doors with a 3/8″ lip (no illustration available)
• For normal use the hinge can be used on door thicknesses up to 1″
• If used on “back-to-back” cabinets a maximum of 13/16″ is recommended
• Hardened steel construction (.082 gauge steel)
• Cabinet must have at least a 4-1/8″ depth. Hinge measures approximately 4″ long by 1-5/8″ by 2″.

Weight rating varies based on the number of hinges used. Please refer to the following information when determining how many hinges will be required:

• 2 hinges: 13 lbs
• 3 hinges: 23 lbs
• 4 hinges: 36 lbs
• 5 hinges: 53 lbs