• This steel piano hinge is stocked in a 72″ length.
• If you need the length to be shorter, this hinge can be cut down using a hack saw or band saw.
• An economical choice for where a strong hinge is needed and corrosion will not be a problem.
• Available in six open widths.
• Screw holes are 2″ apart from center to center.
• Knuckle length is 1/2″.
• A full length piano hinge uses about 72 screws per hinge. (Not included)

Details

• 1-1/16″ Wide Hinge: .040″ Material thickness, .091″ pin diameter, uses #4 flat head screws
• 1-1/4″ Wide Hinge: .060″ Material thickness, .120″ pin diameter, uses #6 flat head screws
• 1-1/2″ Wide Hinge: .060″ Material thickness, .120″ pin diameter, uses #6 flat head screws
• 2″ Wide Hinge: .060″ Material thickness, .120″ pin diameter, uses #6 flat head screws
• 2-1/2″ Wide Hinge: .060″ Material thickness, .120″ pin diameter, uses #6 flat head screws
• 3″ Wide Hinge: .060″ Material thickness, .120″ pin diameter, uses #6 flat head screws