• Easy to install. No special tools needed.
• Aluminum mounting brackets for screw on applications on metal gates.
• Allows a gate to swing to a maximum of 180 degrees in one direction.
• Hinge requires face of gate and post to be flush.
• Requires minimum post size of 2″ x 2″.
• Self-closing or non self-closing versions available.
• Self-closing version closes from 0 to 85 degrees and holds open from 86-180 degrees.
• Features final snap-close action which increases speed at the end of closing. This is ideal when using electric/coded locks.
• Both closing speed and final snap-close action are adjustable using the provided adjustment tool.
• Hold open feature renders this hinge not suitable for child/pool safety.
• See swing diagram above for a clear visual representation of this info.
• Two rows of bearings for consistently superior performance.
• Vertical and horizontal adjustment.
• Hinge gap is adjustable between 1/2″ to 1-3/8″
• All mounting brackets and fasteners are included.

These hinges can be used in any of the following combinations:

• Use 2 of our SKU 928504 to self-close a gate up to 260 pounds*.
• Use 1 of our SKU 928504 and 1 of SKU 928500 to self-close a gate up to 180 pounds*.
• Use 2 of our SKU 928500 to hold a gate up to 1500 pounds* (will not self-close).
• * Weight ratings based on a maximum gate size of 72″ high x 40″ wide.