• Easy to install. No special tools needed. Perfect for swimming pool gates.
• Steel mounting brackets for weld-on or screw on applications.
• Allows a gate to swing to a maximum of 88 degrees in one direction.
• A seperate gate stop (not included) must be installed to restrict gate from opening past 90 degrees. See the documents found under Downloads for further details.
• Hinge requires face of gate and post to be flush.
• Requires minimum post size of 2″ x 2″.
• Self-closing or non self-closing versions available.
• See swing diagram above for a clear visual representation of hinge functionality.
• Features final snap-close action which increases speed at the end of closing. This is ideal when using electric/coded locks.
• Both closing speed and final snap-close action are adjustable using the provided adjustment tool.
• Hydraulic dampened closing action provides quite, smooth, and consistent closing force in a tamper resistant design that will not leak.
• Two rows of bearings for consistently superior performance.
• Vertical and horizontal adjustment.
• Hinge gap is adjustable between 1/2″ to 1-3/8″
• All mounting brackets and fasteners are included.

These hinges can be used in any of the following combinations:

• Use 2 of our SKU 928510 to self-close a gate up to 260 pounds*.
• Use 1 of our SKU 928510 and 1 of SKU 928502 to self-close a gate up to 180 pounds*.
• Use 2 of our SKU 928502 to hold a gate up to 1500 pounds* (will not self-close).
• * Weight ratings based on a maximum gate size of 72″ high x 40″ wide.